• Prolink Adsl2 Modem Router
• Bonded Adsl2+ Modem Router

Notes on Wireless Configuration:If you have a PC connected to the router with a wired connection, we recommend that you use it to configure your WBMR-G54. That said, you can still configure your WBMR-G54 with a wireless connection if you have no computer available with an Ethernet adaptor.Consult your wireless client card or adapter’s documentation to confirm that it’s correctly installed with all necessary drivers.PPPoE/PPPoAIf you intend to configure your Modem Router to use PPPoE or PPPoA for the Internet connection, you will need to contact your ISP provider for login information and DNS primary and secondary addresses before you configure the connection. The manual contains detailed instructions on the steps involved. Now that the WBMR-G54 and your wireless client adapter are installed, you canuse AOSS to configure them.- To begin the configuration, press the AOSS button on the back of theWBMR-G54 for 3 -10 seconds.

The Status light will begin to flashat a faster rate.- Now, push the AOSS button on the client device. Depending on whichdevice you have, this may be either on the device, or in its software.Consult your client device’s documentation if you don’t know where itsAOSS button is.- When AOSS has finished, the Status light will return to its steady flashingstate. Your wireless network is securely set up!Additional AOSS Information:Only one AOSS wireless client adapter can be configured to the AOSS modemrouter at a time.

Prolink Adsl2 Modem Router

Bonded Adsl2+ Modem Router

The buttons will need to be repressed to connect each additionalAOSS wireless client adapter.Do not attempt to configure two separate AOSS networks at the same time, as thismay cause unexpected configurations.If an undesired client has connected via AOSS, you may forcibly disconnect it fromthe WBMR-G54’s advanced configuration menu. This README file describes release note of this CD and containeddriver version for your reference.1.

Known issueWhen you uninstall the WLI-CB-G54/A driver, do not forget restartWindows. Otherwise, driver re-installation must be failed. Refer to 5. How to uninstall the driver.Notice for using WLI-PCM-L11/G/GP/WLI-USB-L11/G under Windows XPWhen the WLI-PCM-L11, WLI-PCM-L11G, WLI-PCM-L11GP, WLI-USB-L11 orWLI-USB-L11G is used under WindowsXP, disabling adapter from networkadapter properties might not work properly. In this case, pleasedisable the adapter from device manager.For WLI-USB-KS11G userUpdate USB adapter's firmware, when you use the driver that is containedin this CD. Execute winupdate.exe in USBKB11FirmwareUSBKS11G folder.2. Update release note of AirNavigatorCD Ver9.11Update Windows 2000/XP driver for WLI-CB-G300N.3.

Driver file versionWLI-CB-B11RTL8180.SYS 5.170.709.2004WLI-CB-G54/A/SWLI-PCI-G54WLI2-PCI-G54/SWLI-CB-AMG54EWLI-CB-G54HP(Windows98SE/ME)CBG54.SYS 3.94.41.2(Windows2000/XP)CBG54.SYS 3.104.64.52(Windows Vista)CBG54.SYS 4.102.15.62.